The MiaSolé FLEX-02 Series PV module is a CIGS based flexible thin-film solar module that supply high power density for many types of applications. These solar panels has the highest efficiency of flexible, thin-film product on the market, with more than 16% cell efficiency.
MiaSolé FLEX-02N(x) modules are ideal for use on just about any flat surface, and they bond to the surface with a peel-and-stick adhesive. This adhesive approach removes the need for racking and cut down labour and logistics cost to provide a 20% lower Balance of Solar cost than a traditional glass solar systems.
The MiaSolé FLEX-02 Series module is certified by IEC 61646 & IEC 61730 and UL 1703 and is available in three lengths.
MiaSoléFLEX-02N(x) modules provide customers the following significant benefits:
- Shadow resistant compared to crystalline PV
- Rock solid construction and “walk on” approved.
- Very flexible and bendable panel
- Higher yield/year from same Wpeak compared to crystalline PV
- Low weight of the modules.
- No surface penetrations, eliminating the worry of leakage.
- An aesthetically pleasing solar solution.
- Superior wind resistance over traditional rack-and-panel systems.
MiaSolé Solar panelsMiaSolé is a manufacturer of lightweight, flexible and high yield solar. The innovative solar is based on the most effektive thin film technology available, and its flexible architecture makes it a good choise for a wide variety of solar solutions, ranging from On Grid residential/commercial roofing solar panels to flexible mobile devices on Boats, Caravans, Trucks and many other Off Grid installations.[/lvca_carousel_item][lvca_carousel_item name="CIGS Technology"]
CIGS TechnologyCIGS solar panels are different from traditional crystalline PV. They have a higher yield per year due to higher light sensitivity, are more environmental friendly, less temperature sensitive, are a lot more shadow tolerant, are more lightweight and are very hard to break. CIGS is the future of solar technology and it's here today.[/lvca_carousel_item][lvca_carousel_item name="Flexibility"]
FlexibilityDue to the way the Miasolé flexible CIGS modules are manufactured, the modules are much more flexible than traditional crystaline panels. The CIGS panels are built on a metal film with laser burned Copper Indium Gallium Selenide (CIGS) on and not with a Crystalline silicon (c-Si) wafer that may crack. The MiaSole panels are much more solid for harsh enviroments and will not suffer from Micro cracks.[/lvca_carousel_item][/lvca_carousel]
There are 3 different length of the MiaSolé Flex -02 series and the length is equal to the wattage produced by the panel.
Here you can see the possible length and there data.
*2.5 mm (0.1 in) for the rest of the module with adhesive
*1.5 mm (0.06 in) for the rest of module without adhesive
**Please see full warranty for details
*** Standard Test Conditions (STC): 1000 W/m2 , 25°C cell temperature, AM 1.5 spectrum